Forum: 16v Tuning

im going to the pod next month and want to know the best bits to buy for more power. ive been thinking a set of 708's or a chip off ebay?....

http://cgi.ebay.co.uk/Peugeot-106-GTi-Camshafts-Newman-Cams-Not-Regrind-/280493370404?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item414eb52c24 ...

do you need a center box as i have been told by some people that you got better performance if you dont have one but then i get told you need one for...

Hi all, Ive got myself come kent cams ( only the pct50 ones which i am told are only a mild cam). And ive been speaking to a guy who says you can...

Hi I want a quick shift but don't know what is easy and does best job on eBay two types come up one is a gear knob and the other looks like a gear...

Just thought id ask if people reccomend them, i would have to get the standered flywheel done as to buy a proper one costs a fourtune. So what are...

hello. can the jp4 engine can run smooth with the j4 ECU? in the J4 ecu the rev limiter is 7250. the lifters in the JP4 can handle it?? ty

hi i have just fitted a 421 manifold ever since i fitted it when slowing in second gear the gear box makes a rattling noise and the gear stick...

Hi, Is it possible to adjust the idle speed on this ecu (it is the Peugeot Sport Super 106 Cup ECU)? Currently, it has an idle of...

hi guys i have a saxo vts and have noticed when i start it first thing i get a very small amount of blue smoke but this clears straight away and does...

Cleaned out my throttle body last night to help towards curing my idle problem I have been working on fixing and I found that there was a lot of...

Well, my gearbox has went in my gti and im having absolutely no luck finding another one! Or any peugeot ones for that matter!! :wacko: Ive been...

I need some help. My ECU is broken on my Peugeot 106 S16. What type of ecu will fit and where do i get a new one for a reasonable price?

Hi there, i just wanted to find out from other people running cams without a remap if they have had any problems? I put catcam 708's in about 3...

iv got mysefl a jp4 head, im pretty sure its already had the j4 springs and followers put in .. if not what the problem il have with usuing standard...

Does someone knows what is the strenght of the fuel pump? Pressure??

hey,guys! my first post here... for about 2 weeks im proud owner of the GTI with 270k km´s...so,engine needs few new things....now i want to tune...

Im looking to improve the torque for my 106 gti...and i want to get ph2 cams for it, are these readily available to buy anywhere?? I want ph2's...

Hi I have fitted a 4-2-1 manifold and since then my car is not running right do I need a re-map or could the lambo sencer be broke as I may of hit it...

need a guide or help to splice my looms fitting a 1998 gti in to a quicksilver 2000 i have both looms both ecus keys barrels and imob boxes can...

What sort of power can the standard bottem end take, is there anything worth doing to strengthen/upgrade it? Cheers All

i have a 1.1 and was going to put a gti lump into it.... whats involved?? do i need to send my loom off? will i need drive shafts ?? i need...

Hi every one Just fitted a 4-2-1 stainless manifold sounds g8 but noticed it heated up within seconds. I know I should wrap it but need to do a 2...

fitted my janspeed yesterday and its real gud quality but when i took it for i drive noticed the gear rod is knockin on the flange that joins to the...

hi a set of kent pt50 cams are for sale i might get would i need anything else to fit these ie flowers, valve springs as all these are are the cams...

hello can anyone help me am having an engine built around 300bhp at the fly wheel and am looking for a gearbox to cope that isnt going to cost the...

1st of all , sorry for litering the forum with my problems :) but . can anyone tell me what marks are on the inlet cam and what are on the...

HI every one i have fitted 4-2-1 manifold, pugsport straight through exhaust and a bmc induction kit. to my 16v gti woulf anyone know what sort of...

right ..the heads all on and everything re-attatched and the starter motor is turning it over but its just not igniting , do you have to make changes...

can some one please advise me on how to install the valve springs? i have brouught a valve sring compressor but as the springs are recessed withing...

Hi Has anybody had there standard piston's pocketed and refitted instead of having forged item's dropped in. If so roughly how much was the...

Whats the difference? whats better? I've got a 4-1 and have seen a cheap 4-2-1. Thanks :D

right guys im after a throttle body kit for my gti. the car has omly got an airfilter, mani straight through kam racing exhaust. i have been looking...

hi i have a 106 gti and have fitted a bmc cda induction kit but want to force air into it. but cant find any where on the bumper to fit ducts. the...

after an induction kit like this where can i get one http://i11.ebayimg.com/05/i/07/c2/8e/b4_1_sbl.JPG

has any one converted there gti engine to a 206 gti (180bhp) if any one has what needs to be changed

hi guys am going to be buildin a engine for my car soon just wondered are j4 pistons and jp4 pistons the same diameter? im lookin to use hi...

Hi everyone, I've been sorting out problems with my GTI injectors recently and thought I should post the Info I found as it took quite a bit of...

Hey. My new crankshaft sensor came today and the tip of the sensor is too long compared to the existing sensor which I removed. The plug on the...