Nimrod Wheels

[t_m_evans]

Ok 106parts have these for sale on ebay but when asked if they would fit a 106 was told 'THESE WOULD NOT FIT A 106'

can anyone confirm this or what mods ppl have done to get them to fit??? tyre size im guessing 195/40/16 profile??

the only reason is after seeing the pictures of Toms pug i just want a set!
anyone got a sent for sale or can help me in any way??

[Rallye James]

They will fit with 40 profiles, unless your car is quite low, but they need spacers IIRC

There's some for sale here

http://www.106owners.co.uk/forum/index.php?topic=359.0

[hugh_106]

You need spacers and longer wheel bolts, costs a hell of a lot for what they are. I love them too though, really want some on my Quiky.

[james_pug]

your looking at about �£40 for spacers (how much mine were from euro car parts) then i got quoted �£50 for wheel nuts so thats �£90 + the cost of the wheels + the cost of the spacers

[t_m_evans]

have you not requoted yourself there james??

ok if spacers are needed anyone tell me how big??? 3mm,5mm or 10mm?? longer bolts are not a problem...

and just on another note anyone dealt with 106parts can i ask how you have found there service??

[pugginquik]

Ive found em very good, can seem a little sharp sometimes and prices arent the cheapest but service is good, you pay for what you get! :)

[piglet0073]

have you not requoted yourself there james??

ok if spacers are needed anyone tell me how big??? 3mm,5mm or 10mm?? longer bolts are not a problem...

and just on another note anyone dealt with 106parts can i ask how you have found there service??


They are very good with the small orders yes. but my pugsport did take them 8 weeks to get it to me. Its a Email only company and they usally reply within 24 hours if you have any problems.

Tom

[Dan]

You need 16mm spacers mate.

I couldnt find them anywhere so I sold the wheels for �£350 with brand new unfitted toyo proxes. 195/40/16.

[james_pug]

You need 16mm spacers mate.

I couldnt find them anywhere so I sold the wheels for �£350 with brand new unfitted toyo proxes. 195/40/16.


you dont need 16mm spacers ive got 9mm on mine

[Dan]

Not what ive been told for quiksilvers.

Apparently a 16mm spacer minimum.

So spoox peugeot specilists told me.

[Fuzzy Orange]

WHO TOLD YOU? LOL I told you before spoox you big gay

16mm is correct

206's run 34mm offset wheels
106's need between 15 and 18mm ideally

They make special 16mm offset adaptors to fit 206 wheels to a 106 but they cost a fortune!
They're hubcentric aswell which means the wheel will sit properly not like the cheap 10mm spacers you can buy from motor factors

Its worth it though - think nimrods are one of the nicest wheels you'll ever see on a 106

[t_m_evans]

well if its 16mm spaces you need then you needed a set of these!

http://cgi.ebay.co.uk/OMP-16mm-Wheel-Spacers-PEUGEOT-CITROEN-4-STUD_W0QQitemZ330080790566QQihZ014QQcategoryZ10406 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

and if thats what spoox tell me i need then i now that there info is good!

i've known the guys there for a long time and they have always given great advise!

[Silky]

16mm is correct

206's run 34mm offset wheels

206'S aren't 34mm Offset, they are 25mm offset, 106'a are 12-15 hence approx 10mm spacers

[piglet0073]

Im pretty sure i have 10mm on the back of mine

[Tuscan]

I had 14" nimrods with 10mm spacers.

If you need any offset info just use my link guys.

http://www.alloyguide.co.uk/