pugginquik
24-01-2007, 02:52 PM
Okay so i bought the car january 2006 she was absolutely immaculate (apart from odd car park dint and a faulty heater) and completely standard. Paid £2800 X (2000) with 36k
First day http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0206.jpg
First mod was the alarm, went for a toad over clifford as id read and heard a lot of bad things about the cliffords in my price range. I went for the Toad ai606 which was £220 fully fitted.
After that i stoopidly decided to tackle the heater problem myself to save money (was quoted £250 to replace the heater blower motor) can now see why! I paid £28 for the blower motor and spent a good 3 hours fitting it. It was such a swine! Dash really needed to come out but i mis-read the haynes ::) :o Managed it in the end with a few cut knuckles!
Next i replaced the rubber, quite simply the Pirellis were shit! I had dunlop sp200 fitted all round for £200 and was amazed at the difference, breaking in the wet was improved id say about 80% they really are unreal with a bit of water on the road, id go as far as to say they perform as well as in dry!
http://i42.photobucket.com/albums/e341/nickdirtyd/IMR01122.jpg
Didnt do much else other than mats n bulbs here n there. The mats are e-tech tailored ones and really go well with the quiky interior! as for the bulbs i had to get rid of the indicator orangeness! the silvertec bulbs are a subtle but very effective mod!
http://i42.photobucket.com/albums/e341/nickdirtyd/Picture013-1.jpg
http://i42.photobucket.com/albums/e341/nickdirtyd/Picture019-1.jpg
Next up was the exhaust, had a cat back powerflow twin 3" round fitted for £250 which i was well impressed with considering my cat is in manifold which meant i needed 3 mtrs of s/s piping.
http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0275.jpg
After that 1 day i decided (while stood in front of the rubber grommets at halfrauds) to de wiper the rear.
http://i42.photobucket.com/albums/e341/nickdirtyd/Picture00991.jpg
2days later i replaced the rubber grommet with the genuine pug part!
Then i upgraded to gti brakes. Bought a nicely refurbed set that fuzzy found on ebay.
Painted em up
http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0435.jpg
http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0438.jpg
http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0610.jpg
Paid £55 for the calipers with some pads which were nr new, calipers were mint, all new seals etc.
£20 for paint then £55 for the mintex discs n pads. £50 for fitting
Must say the difference is unreal for such little money.
More recently i fitted a raceland induction kit. That cost £59 off ebay then bought some silicone hose and a stainless steel breather for £35
Will eventually paint the enclosure black.
http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0680.jpg
http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0679.jpg
Last but not least my french plates
http://i42.photobucket.com/albums/e341/nickdirtyd/Image030.jpg
£35 BARGAIN
Couple of recent shots, really need to clean her n get some more.
http://i42.photobucket.com/albums/e341/nickdirtyd/DSC01289.jpg
http://i42.photobucket.com/albums/e341/nickdirtyd/DSC01263.jpg
Future mods:
miltek decat manifold
fk coilovers
upper strut brace
and general tidy under bonnet
would also like to de lock boot, debadge bonnet n smooth bumper, de bar front bumper, colour code door handles and maybe a little ice. But this all depends on new job and stuff :(
First day http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0206.jpg
First mod was the alarm, went for a toad over clifford as id read and heard a lot of bad things about the cliffords in my price range. I went for the Toad ai606 which was £220 fully fitted.
After that i stoopidly decided to tackle the heater problem myself to save money (was quoted £250 to replace the heater blower motor) can now see why! I paid £28 for the blower motor and spent a good 3 hours fitting it. It was such a swine! Dash really needed to come out but i mis-read the haynes ::) :o Managed it in the end with a few cut knuckles!
Next i replaced the rubber, quite simply the Pirellis were shit! I had dunlop sp200 fitted all round for £200 and was amazed at the difference, breaking in the wet was improved id say about 80% they really are unreal with a bit of water on the road, id go as far as to say they perform as well as in dry!
http://i42.photobucket.com/albums/e341/nickdirtyd/IMR01122.jpg
Didnt do much else other than mats n bulbs here n there. The mats are e-tech tailored ones and really go well with the quiky interior! as for the bulbs i had to get rid of the indicator orangeness! the silvertec bulbs are a subtle but very effective mod!
http://i42.photobucket.com/albums/e341/nickdirtyd/Picture013-1.jpg
http://i42.photobucket.com/albums/e341/nickdirtyd/Picture019-1.jpg
Next up was the exhaust, had a cat back powerflow twin 3" round fitted for £250 which i was well impressed with considering my cat is in manifold which meant i needed 3 mtrs of s/s piping.
http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0275.jpg
After that 1 day i decided (while stood in front of the rubber grommets at halfrauds) to de wiper the rear.
http://i42.photobucket.com/albums/e341/nickdirtyd/Picture00991.jpg
2days later i replaced the rubber grommet with the genuine pug part!
Then i upgraded to gti brakes. Bought a nicely refurbed set that fuzzy found on ebay.
Painted em up
http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0435.jpg
http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0438.jpg
http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0610.jpg
Paid £55 for the calipers with some pads which were nr new, calipers were mint, all new seals etc.
£20 for paint then £55 for the mintex discs n pads. £50 for fitting
Must say the difference is unreal for such little money.
More recently i fitted a raceland induction kit. That cost £59 off ebay then bought some silicone hose and a stainless steel breather for £35
Will eventually paint the enclosure black.
http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0680.jpg
http://i42.photobucket.com/albums/e341/nickdirtyd/SP_A0679.jpg
Last but not least my french plates
http://i42.photobucket.com/albums/e341/nickdirtyd/Image030.jpg
£35 BARGAIN
Couple of recent shots, really need to clean her n get some more.
http://i42.photobucket.com/albums/e341/nickdirtyd/DSC01289.jpg
http://i42.photobucket.com/albums/e341/nickdirtyd/DSC01263.jpg
Future mods:
miltek decat manifold
fk coilovers
upper strut brace
and general tidy under bonnet
would also like to de lock boot, debadge bonnet n smooth bumper, de bar front bumper, colour code door handles and maybe a little ice. But this all depends on new job and stuff :(