PDA

View Full Version : Washer jet problems


hugh_106
29-05-2007, 03:54 PM
My washer jets just aren't working. Water isn't coming out. Whats the best place to start looking for problems? The water level is topped up and the tubes near the jets look ok. Am i gona have to get the wheel off and look at the reservoir or has anyone got some other ideas to try first?

Thanks

hrg
29-05-2007, 03:56 PM
can you hear the motor working or not?

gazz
29-05-2007, 04:09 PM
Pump! Get the wheel off and check the pump mate :)

Mine was knackered the other week :(

Gregg_s
29-05-2007, 04:57 PM
mine had the same problem take the front right wheel off and the arch lining and the pumps in there...look for the small cylinder on the end that alternates between the front and rear washer jets and take it off...if the little part in there is moving around freely its the pump if not then that little part is sticking to the inside of the cylinder....thats what i found with mine hopefully itll work for you if not then im clueless

Lacky
29-05-2007, 09:03 PM
yeah the pump is odds on to be shagged! I could hear mine working but it was still fooked.

Rallye James
29-05-2007, 09:11 PM
Is there a seperate pump for the back one? My front ones are fine but the back one has never worked :p