Quicky To 16v Conversion

[DJ2003]

Hi I Have Put 16v Gti Engine Into Quicky Complete Shafts Gearbox Ecu And Loom Etc But Fuel Pump Will Not Prime Does Any One Have Wiring Diagram For Round Multi Plugs On Chasis Leg For 1.6 Gti Engine And Also Quicky Engine ...???
I Need Help To Get This Bad Boy Running !!!!:)

[Daz]

I'm sure you know what you are doing but have you checked fuses?

Also it is handy to have a haynes manual for wiring diagrams:)

[DJ2003]

Yer I Have Checked Fuses But They All Appear To Be Ok .can You Tell Me What Fusde Is For The Pump ? So I Can Double Check

[Daz]

I don't have the Haynes with me I'm afraid so can't check sorry.

[KustomX]

i think u can find them in the car's manual if you still have it....

[chompy]

is the ECU unlocked?

[Quiksilver GTI]

yeah make sure the ecu is unlocked/working. you will probably need to splice up the engine loom to car loom for the fuel pump power. I had to do that, I cant remember which pins on the multiplugs didnt match up, but it was basically just the fuel pump that was needed to get the engine to run. once you find which pins are what for each loom you need to find which wire it is for the pins that dont match so a multi-meter is needed. then connect the wires (obviously needs to be soldered properly after testing) and see if the pump primes.

Hope that makes sense, deep in revision so brain scambled

Edit - I have number 35 in my head for some reason, when i get home i can try and check for you but my multi-meter is at home home.

[DJ2003]

Yer I Just Got Ecu Back This Week From Being Un Locked But It Still Does Not Prime If You Could Cconfirm What I Need To Do To Loom It Would Be Much Appreciated Mate

[N@ughtyBoy]

That must be a loom issue cose the quicky interior loom is not the same as the GTI one, if you dont like to re-wire, just replace the entire loom like.