PDA

View Full Version : Question Can i use this???


drka-drka
17-05-2008, 10:37 AM
106 gti box n engine (2001)

41,000 miles£450
106 gti box loom and full engine from a 2001 106 gti with46391 miles. no ecu as damage in o/s/f smash. was for an engine conversion but just bought a house so had to scrap the idea

i have just copy and pasted it from the add, its local to me, but no ecu sounds like it could be a pain in the butt

ATFoxy 106
17-05-2008, 01:44 PM
u need an unlocked ECU for that pal thats all. if the loom for the engine is there u are halfway there.. the only otherthing u need is a GTI interior loom from the same year. or u need to send ur interior loom off to be spliced in as pugs are gay and dont use plugs!

loudandproud205
17-05-2008, 03:21 PM
2001 is 3 plug any way and yours is single, best bet is to find a full 2000+ looms and change yours for that one, you can even have the funky digital display on the dash then

chompy
18-05-2008, 11:42 AM
if you change it back to a single plug loom you'd need to change some sensors on the engine as im sure theres diffrences between plugs.

just re-wire the engine loom to suit your interior loom :D

you'd need an ECU aswel

liaminllan
29-05-2008, 07:34 PM
just run the engine on your single plug ecu and loom as im guessing you already have a valver fitted

loudandproud205
30-05-2008, 07:34 AM
no he dont have valver fitted but am purseuding him.

oh and if i knew you still after one i just had offer of full gti engine box and unlocked ecu for £250 and was single plug