View Full Version : Dashboard Engine Light Taken Out?
JamesL
18-01-2007, 02:07 PM
Hey,
I need to take a the engine light out on my dash? Its the orange engine light?
Its hard to do. I know there are two screws at the top but whats after that?
James
18-01-2007, 03:17 PM
why do you have to take the engine managment bulb out for?
JamesL
18-01-2007, 03:23 PM
Beacuse the orange light keeps coming on beacuse of something faulty on the CAT, but its passed its M.O.T anways. It must be the sensor.
Just dont like the light being on and dont wanna pay the garage £25 to remove it via computer, beacuse it will come back on within 1 - 4 weeks. :(
Its it fairly easy to do that? Undo them 2 screws?
James
18-01-2007, 03:25 PM
removing the engine managment light is a bit stupid! if its coming on theres obviously something wrong , dont be a tight arse and get it fixed then it wont be on
JamesL
18-01-2007, 03:36 PM
Its the sensor, and its around £100.
Not worth it mate. Esp. on a 1.1 :P
James.G
18-01-2007, 03:37 PM
what sensor is it? lamba?
James
18-01-2007, 03:38 PM
you wont be saying that when something else fucks up on the car and u had no warning because you got no engine managment light!
James.G
18-01-2007, 03:39 PM
yeah, then you'll be fucked :D
JamesL
18-01-2007, 03:42 PM
Lamba I think.
Its Peugeot, nothing will go wrong. :P
James.G
18-01-2007, 03:43 PM
get it fixed, or do it yourself, the lamba might just need a clean.
James
18-01-2007, 03:43 PM
its FRENCH! everything will go wrong!
James.G
18-01-2007, 03:44 PM
hes speaking from experience.... 8)
JamesL
18-01-2007, 03:45 PM
its FRENCH! everything will go wrong!
Was joking. :) Will give a clean at some point. Some one said you use petrol? Does it just twist out?
James.G
18-01-2007, 03:47 PM
yes 22mm spanner will sort it out. and yes petrol should work.
JamesL
18-01-2007, 03:48 PM
yes 22mm spanner will sort it out. and yes petrol should work.
Thanks, will sort it later this week. When I ave time. :)
Rallye James
18-01-2007, 03:56 PM
So how do you replace the dash lights?
My dipped beam one is tempremental
erm if its the digital dials they are led's but if its analogue, take out the clocks and the bulbs twist out then replace and twist back in
vBulletin® v3.7.4, Copyright ©2000-2008, Jelsoft Enterprises Ltd.