Help required ASAP!

[Zippy]

Me and a friend are trying to wire up my Vibe sub and we've finally come to a stop. We have the remote and power cable running under the passenger seat...

Now here's the problem.. We can't find any hole to feed the power cable through to the battery. Any help would be fantastic.

thanks :)


(its a GTi if that makes any difference)

[Jack_Pug]

I have hole in boot where the power cable goes through then tie rapped under the car then up through to the engine. Allthough my power cable is pretty good and thick, dunno if this help but works ok and no mess through car.

[scotty89]

Can u see any hole in the engine bay where anything runs in to the car?

[Zippy]

We cant find any hole under the glovebox. Should there be one?

[Zippy]

Can u see any hole in the engine bay where anything runs in to the car?

Yes. the bonet realese. But the hole doesnt appear to be big enough

[scotty89]

can u not see any other hole were wiring come through when i done me mates there was a hole on the right hand side big enough

[Zippy]

Im going to take another look;..

[Dargs]

there is deffinatly a bung in the passenger foot well :)

[will_1988]

take the glove box out, u'll find one behind there ;)

[Kinger]

on my quicky, i lifted the bonnent and followed some wires through. it comes through to the top right behind the glove box if u get what i mean, it was quite tight but came through in the end!!! :D

[Zippy]

Cheers lads. Ill take another... look soon. lol.

Glovebox easy to remove?

[Tim]

two pins, they come out if u slide them using screwdriver or something similair, there should be a bung behind it in top right corner, comes out just under the pas brakes in engine bay i think, takes a lot to push if through the bung but it keeps it sealed tight

[Zippy]

Cheers Tim :)

[Tim]

No prob, let us know how it goes, btw have u sold the old 106 now?

[Zippy]

Grrr! I've given up already!

Cant even get the bloody glovebox off lol.

Yeah sold the old 106 to a bloke a work:)

[Dan C]

A metal coat hanger really helps! I did mine from the engine side,taped the wire to the coat hanger, pushed the coat hanger through the grommit, and then pulled the coat hanger through from the inside!

[Zippy]

All sorted now :D

But bloody hell.. getting them pins back in the glovebox was a pain in the ass!

[darren106]

Its a little gromit, right in the passengers footwell, up behind the glovebox, if u pop the bonnet, its quite close(behind) where the brake fluid goes, thats how high u need to be in the footwell....hope this helps.....