Raceland Ind Kit

[pugboy106]

Ne 1 know if the one for a gti will fit an xs? :confused:

[Fuzzy Orange]

They sort of do - its a very tight fit around the coil pack on the side of the engine

If you dont mind doing some mods give it a go

Or alternatively get a BMC CDA type box with some custom pipes :)

[Rallye James]

Yes, but not very well - it would be the same as fitting it to the Rallye like I did before. You need a piece of Samco hosing (or similar) about 15cm long as the throttle body is further across on the 8v. You will have to move the coilpack back (put the two front screws in the two back holes) and the enclosure will need to be cut on the underside so that it sits lower down and the bonnet can close.

Mine never fitted very well so I took it off.

[danvilla2]

It aint rocket science ;) But it requires a bit of patience and a willingness to molest the housing.