mk2 bumper/saxo bumper to mk1 106?

[badboy]

anyone have a easy to follow step by step guide should have my new bumpers in bout 3 days and wanna have the know how to fit them str8 over im aware theres a slight problem with the lights or slam panel? do i need to drill new holes or summin guys ??

i know some of u must know how its done especially mat-106 i think you did it to your widearch mk1 pug didnt u bud?

please lemme know guys i intend to fit these and the civic 92-95 halo lights to my mk1 :) should be pretty gud in the end run ;) i hope

as usual...

thanks guys and gals for ya help :D

ps. any pics of it previously done would be great :D

[mat106]

If you have a front panel and slam panel for a mk2 then just bolt them on and fit the bumper, the rear bumper will fit straight on but the peg in the middle needs cutting off, if you have a rear bumper that is. I had to have some brackets welded on to my mk1 front panel but if you can get hold of a mk2 slam panel and front panel with the brackets on for the bumper then just fit it. The bonnet will swap straight over with no modifications and the lights fit a mk2 better than mk1, as the bumper and bonnet don`t even need cutting. I will be doing the headlight final fit tomorrow so more pictures will be added to the blog page, as the civic eyebrows arrived yesterday.

[badboy]

nice one mate can always rely upon u to answer and sort my technical queeries and questions :D thanks mate i think im going to save for a pair of civic morrettes assuming theyre available :S lol as never seen morrettes fitted to a mk1 and they look the tits i say :) how do i fit the mk2 slam panelmate? i dont know how to remove my slam panel either lol! is it just held in by a couple of 8-10 mils? or is it more complicated then that all help would eb mucho aprecieated mate thanks bud :)

[mat106]

There is a 13mm bolt at each end at the top, and there are 2 bolts each side at the bottom, behind the panel and they are easy to get to. The bumper will be removed shortly so i will take some pics of it removed.

[badboy]

nice one cheers mate:D

[mat106]

http://i44.photobucket.com/albums/f30/mat106/My%20Baby/100_0096.jpg

The rest will be on the blog page, rather than filling this page up with the same.